MUD DRAGS

Classes

  1. ATV
  2. SXS
  3. Stock
  4. Pro Stock
  5. Open
  6. Unlimited

Buckeye Off Road Adventure Expo Mud Drag Rules

General Rules:

  1. No drinking and driving
  2. Driver’s meeting will be held before start of race
  3. Judge’s decisions are final
  4. Helmets and eye protection must be worn by all participants
  5. All participants must sign a waiver
  6. One driver per vehicle per class.
  7. Each driver will have two minutes to stage once name is called
  8. Each class will be double elimination

Stock

  1. Vehicles must be able to be street legal. (Be able to pass a vehicle inspection to get plates)
  2. PPE – Arms and Legs must be covered – Non Polyester material
  3. Vehicle must retain OEM structure (No gutting)
  4. “Body swaps” Not allowed
  5. Tires must be DOT approved, limited to 35” in diameter
  6. 3 “mods” total allowed
  7. Total overall lift limited to 4” (includes body and suspension combined) (Mod)
  8. Intake and Carb is one Mod
  9. Fuel Injection – Increase in CFM and chip is one mod on GAS ONLY! (no chipped diesels!)
  10. No aftermarket Heads
  11. No blowers, aftermarket turbo’s,
  12. No performance enhancing fuels (VP Racing, nitrous, propane injection etc.)
  13. Gas and Diesel only, (Diesels must be Stock HP no programmers)
  14. Propane may be used but only as a primary fuel source! (No injection)
  15. Fuel cells allowed (not a mod)
  16. Drive shaft hoops not required but Highly Recommended.
  17. Diff lockers or spools allowed (Not a Mod)
  18. Must also meet all required points in vehicle rules.

(MODIFICATION DEFINITION: ALL NON-OEM PARTS – IF THE VEHICLE DID NOT COME FACTORY EQUIPPED WITH IT “IT” IS A MODIFICATION)

Pro Stock

  1. Hood and windshield required.
  2. PPE – Arms and Legs must be covered – Non-Polyester material
  3. OEM structure must be recognizable
  4. Fiberglass bodies or tube frames not allowed.
  5. Wheelbase must remain to body length. Wheels must fit under wheel wells.
  6. Body swaps allowed.
  7. Tires must be DOT approved and limited to 38” in diameter
  8. No cut paddle or pivot tires.
  9. No lift limit.
  10. No blowers or aftermarket turbo’s,
  11. No nitrous – (remove bottle, alcohol etc.)
  12. Gas, Diesel, and VP allowed
  13. Propane may be used but only as primary fuel source! (No injection)
  14. Driveline loops required. U-joint guards on differentials mandatory.
  15. No frame extensions
  16. Transmission shield required only if transmission brake present.
  17. Must also meet all required points in vehicle rules.

Open Class Rules

  1. Hood and windshield required or approved fire suit must be worn.
  2. PPE – Arms and Legs must be covered – Non-Polyester material
  3. Body swaps allowed.
  4. Any tires any size.
  5. No lift limit
  6. No blowers/ superchargers or aftermarket turbo’s.
  7. No nitrous-remove bottle, alcohol etc.
  8. Gas, Diesel, VP allowed.
  9. Diesel only – Twin turbo’s allowed
  10. Propane may be used but only as a primary fuel source! (No injection)
  11. Driveline loops, U-joint guards on differential Mandatory.
  12. Roll bar is mandatory on unaltered OEM Cabs.
  13. Altered cab must have a minimum 4 point Roll Cage with 5 point harness is mandatory.
  14. Neck braces recommended.
  15. Transmission Brake Allowed.
  16. Transmission must have shield
  17. Multiple carbs allowed.
  18. Must also meet all required points in vehicle rules.

Unlimited Class

  1. Hood and windshield required or approved fire suit must be worn.
  2. PPE – Arms and Legs must be covered – Non-Polyester material
  3. Body swaps allowed
  4. Any rubber tires any size
  5. Forced air induction
  6. Nitrous
  7. Driveline loops & U-joint guards on differential mandatory
  8. 5-point harness mandatory and neck braces recommended
  9. Must have a roll cage
  10. Anything Goes
  11. Must also meet all required points in vehicle rules.